Cedar Industries Roof Top Tent Systems

We are pleased to be able to offer the Cedar Industries Roof Top Tent Systems. Imagine, no more fumbling around in the dark trying to setup your tent. With this system, park your vehicle, remove the travel cover, lower the ladder and pop open the tent. It’s as simple as that. There is plenty of room for two people to sleep in rainproof comfort on the built in mattress. Ventilation is provided by windows with mosquito netting on all 4 sides of the tent. In stock now ready for winter camping.

Specifications:

• Base: Heavy duty polystyrene foam with double aluminum alloy-cover
• Size
  Open: 95 inches long, 55 inches wide, 51 inches high

Closed: 47.5 inches long, 55 inches wide, 11 inches high
• Net Weight: 110 pounds with ladder.
  95 pounds without ladder
• Ladder: Aluminum, length adjustable
• Canvas: 300D polyester with PVC coating, waterproof, rot and mould resistant
• Fly Sheet: 200D Oxford fabric with UP coated, easy-cleaning
• Mattress: 2.5 inch thick heavy density foam, with zipped removable 300D polyester cover.
• Cover: heavy duty PVC cover, operated by zip with base

Features:

Flysheet	All tents come with an integral PVC flysheet which is raised above the tent on aluminum bows. Due to the insulating cushion of air between the tent and the flysheet, these tents remain a lot cooler in the hot sun - and condensation, especially during those very cold nights, is all but eliminated.
Window awnings	There is one on each side, providing protection from sunlight as well as protection from adverse weather. The awnings can remain open at all times, with adjustable insect netting and separate window flaps located inside the tent, allowing for instant climate control.
Entrances	At each end of the tent is a large entrances opening. This is shaded by the PVC fly awning. Both openings also have complete insect net protection and a zipped canvas flap. Separately zipped mosquito nets on every opening.
Ventilation	Vents in the top of the tent are fully insect screened.
Spring steel	Spring steel stays to tension the flysheet and window awnings are easy to insert into grommets in the base of the tent.
Internal storage pockets
Zips	2-way YKK zips can be used easily.
Mounting	A universal mounting system is standard on all models. This facilitates the easy mounting of the tent to your roof bars or roof rack and also allows for the tent to be opened to the rear, side or in some cases even to the front of the vehicle.
Secure tent cover	Straps on roof tent cover prevent ballooning whilst driving; lower wind resistance saves fuel.